class 1 sound level calibrator

™ and PCE Instrumentation™ (Registration at PONS (Alicante, Spain)): No. The class 1 sound level meter meets all the requirements for noise measurement and frequency analysis. Connection: TNC PCE-322 A and PCE-4XX series. This standard specifies two levels of performance, Class 1 and Class 2, with Class 1 being effectively more accurate. Bar graph • The presence of the LCD helps you through the steps of setting the calibrator, signal the end of the span and allows you to check the status of the battery. Monday - Thursday Graphical, USB (Memory readable via software or directly as mass storage) ET Friday9:00 a.m. - 5:00 p.m. https://www.deltaohm.com/en/privacy-policy-gdpr/, HD32.3TC – HD32.3TCA – Thermal Microclimate PMV-PPD / WBGT, HDMCS-100 – All-in-One Meteo Compact Station, Contact us for more information or a quotation, HD2107.2 – Data Logger Centesimal Thermometer Pt100, HD2134P.2 – Air Speed micromanomenter-thermometer data logger. ACOUSTIC CALIBRATOR ET, Monday - Thursday ANSI S1.43-1997, 1/1 Octave band filter: 8 Hz ... 16 kHz It conforms to the requirements in IEC 60942 for a class 1 sound calibrator. • The calibration sound pressure level is independent of atmospheric pressure: you don’t Cirrus manufactures a range of Acoustic Calibrators and adaptors suitable for the field calibration of sound level meters, noise dosimeters and other noise measurement instruments. In menu mode, it decreases the current value. Part 4: Specifications for working standard microphones”). The calibrator generates these fixed sound level signals for calibration of sound level meters. 1. need to adjust the value according to static pressure over a wide range of values. This integrating precision pulse sound level meter complies with all applicable standards and guidelines (Class 1 EN / IEC 61672, ANSI S1.4-1983, ANSI S1.43-1997 EN / IEC61260, etc.). 35030 Caselle di Selvazzano (PD) ITALY, Email: info@deltaohm.com To exit, press it repeatedly until you go back to the standard screen. When you turn the instrument on, it shows all segments on, and then the sound pressure level (94 or 114dB) will appear in standard view. Thanks to the integrated octave band function, even the slightest differences in the frequency band can be determined here. VAT &. The GPS function allows the user to assign the measured values ​​to an exact position. The CR515 Class 1 Sound Level Calibrator is for the calibration of sound level meters and environmental noise monitors. GHM MESSTECHNIK GmbH Calibrators are available as Class 1 or Class 2, depending on the accuracy needed and any standards being followed. Single Member Company subject to direction and coordination of. The 1000 Hz frequency cannot be changed. Up: in standard mode, it selects 94dB and 114dB pressure levels alternately. This model works with any digital sound level meter. Easy to use, just press a button to start the signal. In addition to the sound measurement function, the noise meter is equipped with a GPS receiver. Need Help? The frequency filter can be optionally upgraded. ON-OFF key: turns on and off the instrument. The 114 dB sound level allows performing calibrations even in high background noise environments. IEC 60804:2000 PCE Instruments™, PCE Inst. PCE-SC 10 is a class 1 acoustic or sound calibrator used to calibrate microphones, sound pressure level (SPL) meters and other noise measuring devices. 5. ANSI S1.4-1983 This card can be read out directly in the PC. Phone: +39 049 897 7150 The typical areas of application for this device are the measurement of workplace noise, compliance with regulations, determination of environmental noise, selection of hearing protection Protector Selection, selection of suitable noise control measures and estimation of noise exposure. DAkkS free field calibration for sound level meter, Measuring Instruments / Test Meters / Sound Level Meter / Noise Level Meter, ISO Calibration Certificate for Noise Meter CAL-SL, Class 1 Sound Level Meter Calibrator PCE-SC 10, Firmware Upgrade to 1/3 Octave Band Filter, Yes, GPS receiver for location determination. ISO calibration certificate for a sound level meters, e.g. 2 year Warranty, Class 1 Sound Level Meter Calibrator PCE-SC 10, Class 1 Sound Level Meter Calibrator PCE-SC 10 Controls, Class 1 Sound Level Meter Calibrator PCE-SC 10 in Use, Class 1 Sound Level Meter Calibrator PCE-SC 10 Delivery Contents, 1 x PCE-SC 10 class 1 sound level meter calibrator. • Its simplicity of use allows the use even by unskilled personnel. Frequency range: 3 Hz ... 20 kHz VAT Number IT03363960281, Privacy Policy | ©2020 Delta OHM S.r.l. DAkkS calibration certificate for sound level meters, certifies the traceability to national test standards. IEC 61672-1:2013 N = Statistics in %: 1 ... 99 %, Fast (F) 125ms, Slow (S) 1 sec, Impulse (I) 35 ms, Microphone: 19 db(A), 25 db(C), 31 db(Z) Calibration frequency 1000Hz, sound pressure levels 94dB/114dB. This website uses cookies to improve your experience. • The HD 2020 calibrator can be conveniently used both in laboratory and in the field. 4. Suitable for use with type 1 or class I noise measuring instruments, this portable decibel (db) meter calibrator is easy to use in the field or the laboratory. IEC 60651:1979 To conserve battery life, the instrument is provided with an automatic power off function: if you leave the instrument on with open cavity, it switches off automatically after 30 seconds. Sensitivity: 40 mV/PA Suitable for use with type 1 or class I noise measuring instruments, this portable decibel (db) meter calibrator is easy to use in the field or the laboratory. 9:00 a.m. - 6:00 p.m. ETFriday9:00 a.m. - 5:00 p.m. Contact Us ISO 9001 calibration report included. Thresholds can be set for each band. LCD display. The display of the sound level meter shows the sound pressure level numerically and graphically in real time. If the microphone is absent or not inserted correctly into the calibrator cavity, the sound level will blink on the display. DAkkS calibration certificate for sound calibrators, certifies traceability to German national test standards. 9:00 a.m. - 6:00 p.m. 5 V / 1 A USB, 70 x 300 x 36 mm / 2.76 x 11.81 x 1.42" (W x H x D). Electronics: 13 db(A), 17 db(C), 24 db(Z), Numerical Calibrator cavity for conventional ½ inch microphones. PCE-SC 10 is a class 1 acoustic or sound calibrator used to calibrate microphones, sound pressure level (SPL) meters and other noise measuring devices. ET, GB/T 3785.1-2010 Sound level calibrator class 1 according to IEC60942:2003 with LCD display. Cal31 from 01dB brand is a class 1 acoustic calibrator for calibration and adjustment of any type of sound level meter equipped with a 1/2 ” diameter microphone. Battery lid. This kit makes it possible to measure the outdoor noise with a sound level meter over a long period of time. The post-processing software of the sound level meter allows convenient measurement data analysis. GB/T 3785.2-2010 ™ and PCE Instrumentation™ (Registration at PONS (Alicante, Spain)): No. PCE-322 A and PCE-4XX series. Suitable for use with type 1 or class I noise measuring instruments, this portable decibel (db) When you turn the instrument on, the display will switch on about three seconds later. Price excl. Power supply: ICCP Standard, LXY (SPL), LXeq, LXYSD, LXSEL, LXE, LXYmax, LXYmin, LXPeak, LXN, X = Frequency weighting: A, B, C, Z A Calibrator is used to check the basic function of a sound level meter before use for important measurements. The 1/3 octave band displays 36 bands from 6.3 Hz to 20 kHz for the PCE-430/432 or 20 to 12.5 kHz for the PCE-428 and associated bar graphs. Microphone Class: 1 2. The impulse function of the noise measuring device enables short-term sound events to be recorded. Advantages of the HD 2020 Sound level calibrator are: Delta OHM S.r.l. - Single Member Company subject to direction and coordination of GHM MESSTECHNIK GmbH All right reserved. The calibrator display shows calibration pressure level, battery life, current date and time. 7. It is composed of an ergonomic and robust case. A 1… Single Member Company subject to direction and coordination of We'll assume you're ok with this, but you can opt-out if you wish. Normal lab test is 2 data points for sound meters. meters, e.g. Point DAkkS calibration class 1 CAL-SC-DAkkS (2). 008985665, 008985632, 008985624 are registered trademarks and PCE Instruments and other names of PCE products referenced herein are trademarks or registered trademarks of PCE Holding GmbH. The calibration certificate is issued especially for the customer and therefore is exempt from the right of return. Via Marconi 5 The sound level meter can also be connected to the PC via USB and the memory can be read out. It is designed for field use and comes with a protective casing. TNC panel socket to 60 cm cable with 90° connector. Leave Feedback. PCE Instruments™, PCE Inst.